Understanding emissions

Burning waste at high temperatures helps to prevent emissions forming. Combustion gases are thoroughly cleaned so that what comes out of the chimney is largely steam, oxygen, nitrogen and carbon dioxide with tiny amounts of pollutants. These are well below the strict levels set by the Environment Agency and laid out in the facility’s permit.

Monitors at the base of the chimney continuously check emission levels and if they start to rise, adjustments are made to the cleaning process. In the unlikely event they continue to rise, or if the monitoring equipment fails, the facility will shut down.

Monitoring information is displayed both in the visitor centre and here on our website. It is also sent to the Environment Agency.

The facility has two identical incineration lines (lines one and two), each with its own emissions information. Routine maintenance is carried out each year, but will usually be staggered so that one line is always in operation. During these periods, no emissions information will be shown for the line which is shut down.

What are the emissions?

Particles

Particles, also called particulates, are formed during the incineration process. These are captured in bag filters and form part of the Air Pollution Control Residue (APCR) which is taken off site in sealed containers.

Carbon monoxide and VOCs as Total Organic Carbon

High temperatures, a good mix of waste and sufficient air are all needed to achieve complete combustion and limit the formation of carbon monoxide and total organic carbon.

The temperature of the furnace is carefully controlled and additional burners can be used to bring up the temperature if it starts to drop.

A good mix of waste is achieved, initially using the grabber in the bunker, but also on the moving grate in the furnace which keeps the waste moving throughout combustion.

The air flow into the furnace is controlled using fans alongside and underneath the grate.

Sulphur dioxide and hydrogen chloride

Many of the things we throw away, including batteries and plastics, contain either sulphur or chlorine. These are released into the combustion gases during incineration and react with the air to form sulphur dioxide and hydrogen chloride.

We inject hydrated lime into the process to neutralise these gases and convert them into a solid which can be captured in the bag filters. This excess lime, particulates, salts and carbon dust make up the Air Pollution Control Residue, which is taken from the site in sealed containers.

Oxides of nitrogen

Whenever anything is burnt in air, oxides of nitrogen are formed. This is because the air we breathe is made up of nitrogen (78%) and oxygen (21%) which combine during combustion. Nitrogen dioxide and nitrogen monoxide are known as oxides of nitrogen or NOx.

To control these in the combustion process, we inject urea into the furnace, which reacts with the oxides of nitrogen to produce nitrogen and water.

 

Main links

You are here

Personal tools